My Cart

Dynamic Precision Cutting System for Table Saw, Mitre Saw, Router, Shaper, and Jointer

All of the units I received are excellent but we are just going to comment on the ones we use every day. We have two identical Saw Stop saws - one is equipped with the right hand pusher and the anti kick back wheel.  The one set up with the Savem System gets most of the use.  The instructor and students seem to gravitate to this one. If contact is made the Saw Stop, stops the blade which is big.  But this comes with a cost, the break and blade can cost up to $200. But with the Savem System on it we can push the board through the blade without getting our hands anywhere near the cutting area while completely eliminating flying push sticks.  The unit holds the board down tight to the table and to the rip fence for a very precise cut and eliminates nearly all kick backs.

Next we’ll talk about the swinging guard and the hold down for the miter saw.  We also use the swinging guard on the miter saw on nearly all of our cuts.  We can now hold the piece down close to the blade for a perfect cut and do it safely.  Also with the hold down for the miter saw we can make so many cuts that we never dreamt we could and do them precise and safely. I sleep much better since we put this system to work.

Next is the hold down and guide system for the router table. This is really a plus.  In fact, to be honest I use it mostly on the shaper. Never have I felt more in control until I used this system. We did not allow the students to use the shaper because it is a dangerous machine, but with the Savem System we are now allowing our more experienced students to use the shaper.

To sum it up, we highly recommend these products, there are built rugged and precise to do a great job for a very long time. But the value is in the safety that they provide.

Warning

There is no way that we can prevent all shop injuries. We can't prevent carelessness, or dumb moves. If you install and use our products like we recommend you will greatly reduce your changes of an injury.

On our videos we are running with the saw guard off to more clearly show how our products work. We are in no way suggesting you take your saw guard off.